Download: Rompox Drain - How To Use - Instructions (Word Document)
Costing of Romex Products
It goes without saying that the Romex products cost more than a typical sand/cement mix. However, when you compare the cost of labour between the two methods, most contractors find that the time saved when using one of the Romex mortars more than compensates for the additional material cost.
There may be a labour saving of between 4 - 7 hours when grouting a typical area of 30m2 of 100 x 100 x 50mm Sandstone or Granite Setts ....
Prices, quantities, and even the length of time required will vary, of course, but most contractors find that once they've used Romex, they are reluctant to go back to hand pointing or a traditional sand/cement slurry. For one thing, jointing using any of the Romex products is done whilst standing: no need to kneel or bend as there is with the laborious mortar pointing technique. It's faster, it's patently cleaner, and in many cases, it's actually cheaper than using a normal cement mortar.
See Tony's comments about using Romex Products
Get a quote for this product
